New Products

3G3JX - SYSMAC Compact Simplified Inverter

• Top and bottom wiring, enables simple contactor replacement.
• Side-by-side mounting, contributes to space savings.
• Micro-surge Voltage Suppression, reduces motor burn out, allows use of most general purpose induction motors.
• Automatic Energy Saving function, significantly reduces energy usage on constant speed fan and pump applications.
• Over current and over voltage trip suppression functions, reduce nuisance tripping.
• Restart function, allows automatic recovery from momentary power loss.
• Built-in PID function, eliminates the need for external controller.
• Built-in Radio Noise Filter, lowers noise impact on other drives and equipment.
• RoHS compliant, environmentally friendly.
• Built-in ModBus-RTU communication, provides networking at very low cost.

Download Brochure      Download Manual      VIEW IN CATALOG

3G3MX - MX Series Compact Open Loop Vector Control AC Drive

Open Loop (Sensor-less) Vector Control for all general purpose, from moderate to high performance applications, such as mixers, compressors and conveyors.

• High starting torque: 200% at 1 Hz, allows starting high inertia loads.
• Side-by-side mounting, saves panel space.
• Micro-surge Voltage Suppression, reduces motor burn out, allows use of most general purpose induction motors.
• Over-current and Over-voltage trip suppression, reduces nuisance tripping.
• Restart function, allows automatic recovery from momentary power loss.
• Built-in PID function, eliminates the need for external controller.
• Removable control circuit terminal block, saves re wiring time.
• RoHS compliant, environmentally friendly.
• Built-in braking transistor, reduce deceleration times when an externally mounted braking resistor is added.
• Built-in ModBus-RTU communication, provides networking at very low cost.

Download Brochure      Download Manual      VIEW IN CATALOG

3G3RX - RX Series Versatile Advanced AC Drive

The RX Series provides the high performance and advanced functions demanded in a general purpose inverter. Optimal performance allows engaging in more applications and successfully satisfying more requirements, as demanding as lifting equipments, like cranes and hoist.

• Open-and Closed-Loop Vector Control, for high performance applications requiring excellent speed and torque regulation, such as extruders, winders, and packaging machines.
• High starting torque: 200% at 0.3 Hz (Closed loop), allows zero speed load holding.
• Combine AC drive with an encoder for feedback, to perform low precision positioning applications.
• Simple positioning control, allows up to 8 step positions, using teaching function and supporting two operation modes like absolute values or interrupt feeding.
• Automatic Energy Saving Function, significantly reduces energy usage on constant speed applications.
• Micro-surge Voltage Suppression, reduces motor burn out, allows use of most general purpose induction motors.
• Over-current and Over-voltage trip suppression, reduce nuisance tripping.
• Restart Function, allows automatic recovery from momentary power loss.
• Built-in Radio Noise Filter, lowers noise impact on other drives and equipment.
• Built-in ModBus-RTU communication, provides networking at very low cost.

Download Brochure      Download Manual      VIEW IN CATALOG

R88GT - G series Super Advanced Servo

Wider range of compact servomotors and servo drives with increased machine compatibility, plus fast positioning with improved response and powerful vibration control technology.

• Reduced footprint, contributes to space savings.
• Real-time gain auto tuning, simplifies the adjustment procedure.
• 1 kHz response frequency, for high speed response.
• Fast positioning, enabling accurate control up to 4 times faster.
• Advanced damping control function and adaptive filter, for vibration and oscillation reduction.
• Change control mode between position, speed and torque control, for improved performance under any load condition.
• Wide selection available in 3000, 2000 and 1000 RPM, for matching load torque requirements.
• All servomotors have 17 Bit encoder, for increased accuracy down to 0.5 µm.
• Models from 50 W up to 1.5 kW single phase, adds versatility in choosing power sources.
• Models from 750 W up to 7.5 kW 230 V 3 phase, improves conductor section current ratio.
• Pulse or analogue input, more freedom to choose any control strategy needed.
• RoHS compliant, environmentally friendly.

Download Brochure      Download Manual      VIEW IN CATALOG

SMARTSTEP2 Series Super Compact Servo

Omron combines advanced functionality in an economical super compact design servo system

• Reduced footprint with 120 mm height, contributes to space savings.
• Real-time gain auto-tuning, simplifies the adjustment procedure.
• Vibration suppression using damping control, useful in low rigidity mechanisms and others with vibrating ends for high speed positioning applications.
• New 90° phase difference input, opens the possibility to input standard encoder output signals directly to SMARTSTEP2 servos simplifying synchronization control.
• Wide range for pulse setting, enabling optimal selection for any device or system.
• Four internal speed settings, simplifying speed control.
• Freely set encoder pulses and phase output, eliminating any restriction found in other systems.
• Parameter unit copy functions, enabling parameter copy to as many servo drives as needed.
• 500K pps command pulse frequency enables high speed / precision control.
• Two torque limit settings, allows switching values according to the application needs.
• Feedback pulse position to the host controller enables to monitor positioning errors.
• Shares servomotors and cables with G series, reducing the number of different parts to be ordered in case of customers that uses also G Series.
• RoHS compliant, environmentally friendly.
• Servomotors are mechanically compatible with the old ones, allowing easy replacement.

Download Brochure      Download Manual      VIEW IN CATALOG

S8JX - Industrial Power Supply

• Three power capacities 50W, 100W and 150W, and three output voltages 5V, 12V and 24V, cover the majority of industrial applications.
• Overload and over-voltage protection on all models for protection of power supply and load.
• Major approvals include CSA 22.2 No.107.1 and UL508 as well as SEMI F47.
• Lead-free design complies with RoHS directive
• Multiple mounting options available – covered or open-frame, DIN-rail or front mounting.
  

Download Brochure (English)     Download Brochure (French)    Download Datasheet      VIEW IN CATALOG

CP1-2GO - Automation Starter Kit

Get Started in Minutes!

One value-packed, comprehensive kit, ready to be used in a wide range of applications. Designed to get you GOing quickly and painlesslly regardless of your level of PLC experience.

Included in the kit:

• CP1L-L14DR-A PLC, AC power, DC input, relay output
• Six-can capacity, thermal lunch bag
• USB programming cable, 2m
• Switch array input simulator
• Pre-wired 120VAC power cord
• CP1-2Go magnetic screwdriver
• CX-Programmer Junior, trial version software, 1CD
• Reference Library (documentation, catalogs, and instructions), 1 CD
• Quick Start Guide instruction sheet

Click here for more details